Differences

This shows you the differences between two versions of the page.

--- combat_robots:brushless_escs [2019/03/13 13:15] – [Specific ESC firmware files] jon
+++ combat_robots:brushless_escs [2019/03/13 13:32] (current) – [Flashing the ESC] jon
@@ Line 30: / Line 30: @@
 ===== Flashing the ESC =====
+http://www.rcgroups.com/forums/showthread.php?t=1513678
 ==== Specific ESC firmware files ====
@@ Line 40: / Line 41: @@
 {{ :combat_robots:unadjustednonraw_thumb_1f5e.jpg?nolink&400 |}}
-Refer to Brushless Hipster post and paste code.
-Sorry this took so long but I've been busy. Here is my original post in the brushless hipsters about it. Check your pins they should match this
+Here's the quote from the Brushless Hipsters FB Group/Github Pull Request via Kyle Singer:
+"Sorry this took so long but I've been busy. Here is my original post in the brushless hipsters about it. Check your pins they should match this
@@ Line 48: / Line 50: @@
 **EDIT**
-ok so after being carefully guided by Mr. Kelly we have a new file for the newest bluest board. It's really the 70a2 with one tiny change but it matters. If someone wants to put this on gethub for the masses that would be awesome. I'm also updating the board picture to include both sides in case someone wants to add it to the spreadsheet.
+ok so after being carefully guided by Mr. Kelly we have a new file for the newest bluest board. It's really the 70a2 with one tiny change but it matters. If someone wants to put this on gethub for the masses that would be awesome. I'm also updating the board picture to include both sides in case someone wants to add it to the spreadsheet."
-rb70av3
+<code>rb70av3
 ;********************************************
@@ Line 106: / Line 108: @@
 .equ INIT_PB = 0
 .equ DIR_PB = (1<<BnFET)
+</code>