====== Bambu Labs P1S ======

===== Important Documentation =====
  * https://wiki.bambulab.com/en/p1/maintenance/p1p-maintenance
  * https://wiki.bambulab.com/en/p1
  * https://wiki.bambulab.com/en/general/printer-network-ports


===== First items to print =====
  * https://makerworld.com/en/models/383756#profileId-289817
  * https://makerworld.com/en/models/385697#profileId-286087
  * https://makerworld.com/en/models/119453#profileId-128488
  * https://makerworld.com/en/models/238993#profileId-266660
  * https://makerworld.com/en/models/236809#profileId-252856
  * https://makerworld.com/en/models/183750#profileId-202603
  * https://makerworld.com/en/models/142877#profileId-155362
  * https://makerworld.com/en/models/57152#profileId-60359
  * https://makerworld.com/en/models/40896#profileId-40984
  * https://makerworld.com/en/models/53058#profileId-54880

===== Printing with non-Bambu filament =====

In The BambuStudio app, for PLA at least, the generic profile should be good enough. If you have leftover MicroCenter 'Inland' brand PLA from your Ender, the eSUN profile should suffice.